瓦斯发电机是采用机械内混方式，定时地打开燃气阀将可燃气体喷入气缸，使燃气与空气在缸内混合，进行燃烧。那你知道怎么对瓦斯发电机提高安装效率吗？下面瓦斯发电机组厂家为您进行解答。

The gas generator adopts the mechanical internal mixing mode. Open the gas valve regularly to inject combustible gas into the cylinder, so that the gas and air can be mixed in the cylinder for combustion. Do you know how to improve the installation efficiency of gas generator? The manufacturer of gas generator set will answer for you.

这样通过增压器、进气管的气体始终是不可燃的纯空气，避免了回火问题。但是，由于爆燃现象时有发生，机组的活塞、气缸、进排气门、进排气门座等故障频繁，使用寿命降低，维护量相当大。

In this way, the gas passing through the supercharger and intake pipe is always non combustible pure air, avoiding the problem of backfire. However, due to the frequent occurrence of deflagration, the piston, cylinder, intake and exhaust valves, intake and exhaust valve seats and other faults of the unit are frequent, the service life is reduced, and the amount of maintenance is considerable.

为了安装的方便、快捷，利用报废的缸套加工了一个锥套(锥套的内外径基本按照缸套的原有尺寸不变，仅仅在顶部加工一段锥面，并在锥面与内孔交界处倒一个大圆角，方便活塞环能顺利压入锥套。

In order to install conveniently and quickly, a taper sleeve is processed using the scrapped cylinder liner (the inner and outer diameters of the taper sleeve are basically the same as the original dimensions of the cylinder liner, only a section of taper surface is processed at the top, and a large fillet is poured at the junction of the taper surface and the inner hole, so that the piston ring can be pressed into the taper sleeve smoothly.

在把活塞安装到气缸之前就把锥套套在活塞环处，使全部活塞环都处于正常使用时的压缩状态，安装时仅仅需要先把活塞裙部放在气缸内，然后稍作调整，使气缸与锥套同心，再轻轻用手缓缓地将活塞推入到气缸内。这样不但降低了劳动强度，而且提高了安装效率。

Before installing the piston to the cylinder, put the taper sleeve on the piston ring, so that all piston rings are in the compression state in normal use. During installation, just put the piston skirt in the cylinder, and then make a slight adjustment to make the cylinder and taper sleeve concentric, and then gently push the piston into the cylinder with your hands. This not only reduces the labor intensity, but also improves the installation efficiency.

此外通过相关规定的保养，能及时发现机组是否存在声音异常、动作异常、外观异常、温度异常、压力异常和气味异常等故障现象，从而及时对机组进行检查和调整，进而有针对性的加以解决，更多有关内容就我们网站进行咨询了解吧！

In addition, through the maintenance of relevant regulations, it can timely find out whether the unit has abnormal sound, action, appearance, temperature, pressure, smell and other faults, so as to timely check and adjust the unit, and then targeted solutions. For more information, please refer to our website Consult and understand!